SMC Technical Guides
All technical guides for SMC: model selection, troubleshooting, replacement and application scenarios.
11 guides in total, page 1 / 1
SMC · Selection Guide
SMC SY7120-5DZ-02 Solenoid Valve: Selection and Parameter Guide
SMC SY7120-5DZ-02 is a SY7000-series 2-position 5-port single-solenoid valve, 24 V DC, DIN socket, with indicator light and surge suppressor, port 1/4 (Rc). This article collects the OEM parameters, model code meanings, and selection points.
SMC · Selection Guide
SMC SY9220-5LZD-03 Solenoid Valve: Selection and Parameter Guide
SMC SY9220-5LZD-03 is a SY9000-series 2-position 5-port double-solenoid valve, 24 V DC, L-type plug, 3/8 port, with indicator light and surge suppressor. This article collects the OEM parameters, model code meanings, and selection points.
SMC · Selection Guide
SMC D-A93 Magnetic Switch Selection Guide: Contact-Type Reed and Applications
Selection points for the SMC D-A93 contact-type reed magnetic switch: load voltage DC 24 V / AC 100 V, load current, internal voltage drop, and mounting method, with a comparison against the contactless D-M9 series.
SMC · Selection Guide
SMC D-M9B Magnetic Switch Selection Guide: 2-Wire Solid-State Switch
The SMC D-M9B is a 2-wire solid-state magnetic switch with a load voltage of DC 10...28 V, load current of 2.5...40 mA, and response of 1 ms or less. This article covers its parameters, wiring, and applications.
SMC · Selection Guide
SMC D-M9PL Magnetic Switch Selection Guide: 3-Wire PNP and Cable Length Options
The SMC D-M9PL is a 3-wire PNP solid-state magnetic switch with a 3 m lead, load current of 40 mA or less, and leakage current of 100 µA or less. This article explains wiring and selection.
SMC · Selection Guide
SMC D-M9N Magnetic Switch Selection Guide: 3-Wire NPN Solid-State Switch
The SMC D-M9N is a 3-wire NPN solid-state magnetic switch with a load current of 40 mA or less, leakage current of 100 µA or less, and response of 1 ms or less. This article covers wiring and comparison.
SMC · Selection Guide
SMC KQ2H06-00A Pneumatic Fitting Selection Guide: Ø6 Straight Union
The SMC KQ2H06-00A is a Ø6 mm straight union push-in fitting with an operating pressure of -100 kPa to 1 MPa and a proof pressure of 3 MPa. This article explains tube-diameter interpretation and piping points.
SMC · Selection Guide
SMC KQ2L10-02AS Pneumatic Fitting Selection Guide: Ø10 Male Elbow
The SMC KQ2L10-02AS is a Ø10 mm male elbow push-in fitting (R1/4, with sealant) for 90° routing. This article explains the model code and selection.
SMC · Selection Guide
SMC KQ2H08-02AS Pneumatic Fitting Selection Guide: Ø8 Male Straight
The SMC KQ2H08-02AS is a Ø8 mm male straight push-in fitting (R1/4, with sealant), a commonly used pneumatic branch connector. This article explains the model code and piping points.
SMC · Selection Guide
SMC KQ2H08-00A Pneumatic Fitting Selection Guide: Ø8 Straight Union
The SMC KQ2H08-00A is a Ø8 mm straight union push-in fitting for same-diameter tube extension and vacuum piping. This article compares its parameters and selection.
SMC · Selection Guide
SMC KQ2H10-03AS Pneumatic Fitting Selection Guide: Ø10 Male Straight (R3/8)
The SMC KQ2H10-03AS is a Ø10 mm male straight push-in fitting (R3/8, with sealant) for medium and large flow piping. This article explains the model code and selection.